Engine Base Price: $9,900
Front Drive Components:
Package Option 1 — $11,899
Complete engine and installed Polished Front Accessory Drive with
1-wire 100 amp Alternator
Part# BPP350FDE
Package Option 2 — $11,999
Complete engine and installed Polished Front Accessory Drive with
1-wire 100 amp Alternator & AC
Part# BPP350FDAC
Manual Transmission and Front Drive Components:
Package Option 1: TKX 5-Speed Manual Transmission — $17,899
Complete engine with installed TKX 5-Speed aluminum bell Transmission and installed Polished Front Accessory Drive with 1-wire 100 amp Alternator
Package Option 2: TKX 5-Speed Manual Transmission — $17,999
Complete engine with installed TKX 5-Speed aluminum bell Transmission and installed Polished Front Accessory Drive with 1-wire 100 amp Alternator & AC
TKX 5-Speed Transmission Specifications
Includes the following:
Mcleod Super Street Pro single disk clutch
Aluminum bell housing
Flywheel
Engine guard
Starter
First Gear Ratio: 2.87:1
Second Gear Ratio: 1.89:1
Third Gear Ratio: 1.28:1
Fourth Gear Ratio: 1.00:1
Fifth Gear Ratio: 0.81:1
*Can be special ordered with 0.68:1 Fifth Gear Ratio
Automatic Transmission and Front Drive Components:
Package Option 1: 700R4 Automatic Transmission — $17,899
Complete engine with installed 700R4 Transmission
and installed Polished Front Accessory Drive with 1-wire 100 amp Alternator
Package Option 2: 700R4 Automatic Transmission — $17,999
Complete engine with 700R4 Transmission
and installed Polished Front Accessory Drive with 1-wire 100 amp Alternator & AC
Automatic transmissions include installed Performance Built Automatic transmission, flexplate, starter, 3000+ high stall, custom built converter.
Notes:
The Factory Five ’33 Hot Rod does not support hydraulic power steering.
Electric power steering must be ordered directly from Factory Five.
Hydraulic Master Cylinder is required with all TKX packages
On Automatic transmission packages, the speedometer hole must be plugged with a freeze plug for GPS speedometers. Does not include any speedometer gear housing, as that is gear ratio dependent.
GM Small Block Compatible 400 c.i.
Carbureted
Designed specifically for your new Factory Five build, your power plant choice is obvious with BluePrint Engines’ turn-key drivetrain assemblies. Engineered from the ground up with one mission: Affordable, reliable horsepower that you can drive every day. This means you can count on impeccable horsepower that you can feel the moment you grip the wheel. Because what goes under the hood of your Factory Five should have the kind of horsepower that makes you eager to get outside and get your foot on the pedal.
Horsepower & Torque:
500 hp / 500 ft. lbs.
Compression:
10.3 to 1
Fuel Delivery:
Carbureted, 850 cfm Holley with mechanical secondaries
Manifold:
BluePrint Dual Plane Aluminum
Ignition/Distributor:
Ready to run distributor with ignition coil
Block:
Brand New! BluePrint Engines 4 bolt main block
1-piece rear main seal
Square and parallel decked
Align honed main bearing bore
Cylinders honed on computer controlled machine to within .0002 straightness and roundness
Rotating Assembly:
Forged crank
3.75” stroke and 5.7” Rods
150,000 psi rod bolts
Forged pistons
Balanced rotating assembly
High volume oil pump
Hydraulic roller camshaft
Heavy duty roller timing set
Heads:
BluePrint Performance Aluminum
64cc chamber
Hardened retainers and springs
2.02 swirl polished intake valves
1.60 swirl polished exhaust valves
(BluePrint Aluminum Head Part# H8103)
Cam Specs:
Roller, .555 Intake
.576 Exhaust & 236 Intake
242 Exhaust duration @ .050 – 110 degree lobe separation
Also Includes:
Valve covers
Harmonic balancer
Water pump, short, reverse rotation, 30% more flow over stock pump
Air cleaner
Spark plugs & wires
Dyno test results shipped with engine
Call 308-236-1010 today to order or speak to a product technician!
Call (308) 236-1010 to order today!