Engine Base Price: $10,095
w/Optional Front Drive Components:
Package Option 1 — $11,125
Complete engine with installed Polished 1-wire 100 amp Alternator
Package Option 2 — $12,340
Complete engine with installed installed Polished 1-wire 100 amp Alternator & AC
w/Optional Manual Transmission and Front Drive Components:
Package Option 1: TKX 5-Speed Manual Transmission — $16,780
Complete engine with installed TKX 5-Speed aluminum bell Transmission and installed Polished Front Accessory Drive with 1-wire 100 amp Alternator
Package Option 2: TKX 5-Speed Manual Transmission — $17,995
Complete engine with installed TKX 5-Speed aluminum bell Transmission and installed Polished Front Accessory Drive with 1-wire 100 amp Alternator & AC
Optional TKX 5-Speed Transmission Specifications
Includes the following:
Mcleod Super Street Pro single disk clutch
Aluminum bell housing
First Gear Ratio: 2.87:1
Second Gear Ratio: 1.89:1
Third Gear Ratio: 1.28:1
Fourth Gear Ratio: 1.00:1
Fifth Gear Ratio: 0.81:1
*Can be special ordered with 0.68:1 Fifth Gear Ratio
w/Optional Automatic Transmission and Front Drive Components:
Package Option 1: 700R4 Automatic Transmission — $16,780
Complete engine with installed 700R4 Transmission
and installed Polished Front Accessory Drive with 1-wire 100 amp Alternator
Package Option 2: 700R4 Automatic Transmission — $17,995
Complete engine with 700R4 Transmission
and installed Polished Front Accessory Drive with 1-wire 100 amp Alternator & AC
Automatic transmissions include installed Performance Built Automatic transmission, flexplate, starter, 3000+ high stall, custom built converter.
The Factory Five ’33 Hot Rod does not support hydraulic power steering.
Electric power steering must be ordered directly from Factory Five.
Hydraulic TOB is Standard on TKX with SBC Engine Package.
On Automatic transmission packages, You must plug speedometer hole with a freeze plug for GPS speedometers. Does not include any speedometer gear housing, as that is gear ratio dependent.
’33 Hotrod engine will come with low profile air cleaner for additional hood clearance. Pictured Below.
If a customer requests Modifications or Cancellation of their order after 24 hours of the initial deposit, a $250 Change fee will be charged to accommodate those changes.
Chevy 383 c.i. Fuel Injected
Choose your engine, front drive components and transmission package for a true Factory Five turn-key build!
Designed specifically for your new Factory Five build, your power plant choice is a no-brainer with BluePrint Engines’ all new series of turn-key drivetrain assemblies. Engineered from the ground up with 3 goals: Performance, Reliability and Ease of Installation. Because of this, you’re ensured predictable and dependable performance mile after pounding mile. Because what goes under the hood of your Factory Five is just as important as every other custom build choice you’ll make!
Loaded with ultra-durable components:
Horsepower & Torque:
436 hp / 443 ft. lbs.
10.0 to 1
Fuel Injected, Holley Sniper EFI
BluePrint Dual Plane Aluminum
Ready to run distributor with ignition coil
Brand New! BluePrint Engines 4 bolt main block
1-piece rear main seal
Square and parallel decked
Align honed main bearing bore
Cylinders honed on computer controlled machine to within .0002 straightness and roundness roundness
3.75” stroke and 5.7” Rods
150,000 psi rod bolts
Balanced rotating assembly
Hydraulic roller camshaft
High volume oil pump
Heavy duty roller timing set
BluePrint Performance Aluminum
Hardened retainers and springs
2.02 swirl polished intake valves
1.60 swirl polished exhaust valves
(BP Aluminum Head Part# H8002K)
Roller, .544 Intake
.555 Exhaust & 230 Intake
236 Exhaust duration @ .050 – 110 degree lobe separation
Water pump, short, reverse rotation, 30% more flow over stock pump
Spark plugs & wires
Dyno test results shipped with engine