w/Optional Front Drive Components:

Package Option 1 — $16,925
Complete engine and installed Polished Front Accessory Drive with 
1-wire 100 amp Alternator
Part# BPP427FDE

Package Option 2 — $18,140
Complete engine and installed Polished Front Accessory Drive with 
1-wire 100 amp Alternator & PS
Part# BPP427FDPS

Package Option 3 — $18,345
Complete engine and installed Polished Front Accessory Drive with 
1-wire 100 amp Alternator, PS & AC
Part# BPP427FDACPS

w/Optional Manual Transmission and Front Drive Components:

Package Option 1: TKX 5-Speed Manual Transmission — $23,400
Complete engine with installed TKX 5-Speed steel bell Transmission
and installed Polished Front Accessory Drive with 1-wire 100 amp Alternator

Package Option 2: TKX 5-Speed Manual Transmission — $24,615
Complete engine with installed TKX 5-Speed steel bell Transmission
and installed Polished Front Accessory Drive with 1-wire 100 amp Alternator & PS

Package Option 3: TKX 5-Speed Manual Transmission — $24,820
Complete engine with installed TKX 5-Speed steel bell Transmission
and installed Polished Front Accessory Drive with 1-wire 100 amp Alternator, PS & AC

TKX 5-Speed Transmission Specifications
Includes the following:
Mcleod Super Street Pro single disk clutch
Hydraulic throw out bearing
Steel bell housing
Billet flywheel
Engine guard
Starter

First Gear Ratio: 2.87:1
Second Gear Ratio: 1.89:1
Third Gear Ratio: 1.28:1
Fourth Gear Ratio: 1.00:1
Fifth Gear Ratio: 0.81:1

*Can be special ordered with 0.68:1 Fifth Gear Ratio

w/Optional Automatic Transmission and Front Drive Components:

Package Option 1: 4R70W Automatic Transmission — $23,400
Complete engine with installed 4R70W Auto Transmission
and installed Polished Front Accessory Drive with 1-wire 100 amp Alternator

Package Option 2: 4R70W Automatic Transmission — $24,615
Complete engine with installed 4R70W Auto Transmission
and installed Polished Front Accessory Drive with 1-wire 100 amp Alternator & PS

Package Option 3: 4R70W Automatic Transmission — $24,820
Complete engine with installed 4R70W Auto Transmission
and installed Polished Front Accessory Drive with 1-wire 100 amp Alternator, PS & AC

Notes:

The Factory Five Hot Rod does not support hydraulic power steering.
Electric power steering must be ordered directly from Factory Five.

Type 65 engines will come with a low profile round air cleaner, and rear sump oil pan for fitment.

If a customer requests Modifications or Cancellation of their order after 24 hours of the initial deposit, a $250 Change fee will be charged to accommodate those changes.

Ford 427 c.i. Fuel Injected

Choose your engine, front drive components and transmission package for a true FactoryFive turn-key build!

Nothing sounds meaner than an American pushrod V8!  Not to mention one that features 427 cubic inches, and even outpaces the modern Coyote in Sound, Appearance, and HORSEPOWER! Designed specifically for your new Factory Five, your power plant choice is a no-brainer with BluePrint Engines’ all new series of turn-key drivetrain assemblies. Engineered from the ground up with 3 goals: Performance, Reliability and Ease of Installation. Because of this, you’re ensured predictable and dependable performance mile after pounding mile. Because what goes under the hood of your Factory Five is just as important as every other custom build choice you’ll make!

Loaded with ultra-durable components:

Horsepower & Torque:
485 hp / 475ft. lbs.

Compression:
10:1

Fuel Delivery:
Holley Sniper EFI complete system. Includes electric external mount fuel pump

Manifold:
Weiand dual-plane satin finish

Ignition/Distributor:
Ready to run distributor with ignition coil

Block:
NEW! DART SHP small block
Cleveland mains
Square and parallel decked
Align honed main bearing bore
Cylinders honed on computer controlled machine to within .0002 straightness and roundness

Rotating Assembly:
H-Beam 6-200" rods
4032 forged pistons
ARP 8740 rod bolts
Hastings moly rings
Internally balanced rotating assembly
High volume oil pump
Hydraulic roller camshaft
Heavy-duty roller timing set

Heads:
BluePrint Performance aluminum
60cc chamber
Roller 1.6 ratio rockers
Hardened retainers & springs
2.02 swirl polished intake valves
1.60 swirl polished exhaust valves

Cam Specs:
Roller cam
.608 intake .608 exhaust
248 intake / 258 exhaust @ .050
114 degree lobe seperation

Also Includes:
Ford Racing 427 Cobra aluminum valve covers
Aluminum oval air cleaner with Cobra script
Harmonic balancer
Aluminum water pump w/driver side inlet
Spark plugs & wires
Timing cover
Powder coated oil pan
180 degree thermoset & housing
Oil filter
Plug wire seperators
Fel-Pro molded silicone steel core gaskets
Fel-Pro performance wire ring head gaskets
Brass freeze plugs

Dyno test results shipped with engine

Call 1-800-483-4263 today to order or speak to a product technician!