Engine Base Price: $7,395

w/Optional Front Drive Components:

Package Option 1 — $8,025
Complete engine and installed Polished Front Accessory Drive with 
1-wire 100 amp Alternator
Part# BPP350FDE

Package Option 2 — $9,240
Complete engine and installed Polished Front Accessory Drive with 
1-wire 100 amp Alternator & AC
Part# BPP350FDAC

w/Optional Manual Transmission and Front Drive Components:

Package Option 1: TKX 5-Speed Manual Transmission — $12,845
Complete engine with installed TKX 5-Speed aluminum bell Transmission and installed Polished Front Accessory Drive with 1-wire 100 amp Alternator

Package Option 2: TKX 5-Speed Manual Transmission — $14,060
Complete engine with installed TKX 5-Speed aluminum bell Transmission and installed Polished Front Accessory Drive with 1-wire 100 amp Alternator & AC

TKX 5-Speed Transmission Specifications
Includes the following:
Mcleod Super Street Pro single disk clutch
Aluminum bell housing
Flywheel
Engine guard
Starter

First Gear Ratio: 2.87:1
Second Gear Ratio: 1.89:1
Third Gear Ratio: 1.28:1
Fourth Gear Ratio: 1.00:1
Fifth Gear Ratio: 0.81:1

*Can be special ordered with 0.68:1 Fifth Gear Ratio

w/Optional Automatic Transmission and Front Drive Components:

Package Option 1: 700R4 Automatic Transmission — $12,645
Complete engine with installed 700R4 Transmission
and installed Polished Front Accessory Drive with 1-wire 100 amp Alternator

Package Option 2: 700R4 Automatic Transmission — $13,860
Complete engine with 700R4 Transmission
and installed Polished Front Accessory Drive with 1-wire 100 amp Alternator & AC

Notes:
The Factory Five '33 Hot Rod does not support hydraulic power steering.
Electric power steering must be ordered directly from Factory Five.

Hydraulic TOB is Standard on TKX with SBC Engine Package.

On Automatic transmission packages, You must plug speedometer hole with a freeze plug for GPS speedometers. Does not include any speedometer gear housing, as that is gear ratio dependent.


If a customer requests Modifications or Cancellation of their order after 24 hours of the initial deposit, a $250 Change fee will be charged to accommodate those changes.

 

Chevy 400 c.i. Carbureted

Choose your engine, front drive components and transmission package for a true FactoryFive turn-key build!

Designed specifically for your new Factory Five build, your power plant choice is a no-brainer with BluePrint Engines’ all new series of turn-key drivetrain assemblies. Engineered from the ground up with 3 goals: Performance, Reliability and Ease of Installation. Because of this, you’re ensured predictable and dependable performance mile after pounding mile. Because what goes under the hood of your Factory Five is just as important as every other custom build choice you’ll make!

Loaded with ultra-durable components:

Horsepower & Torque:
508 hp / 473 ft. lbs.

Compression:
10.3 to 1

Fuel Delivery:
Carbureted, 850 cfm Holley with mechanical secondaries

Manifold:
BluePrint Dual Plane Aluminum

Ignition/Distributor:
Ready to run distributor with ignition coil

Block:
Brand New! BluePrint Engines 4 bolt main block
1-piece rear main seal
Square and parallel decked
Align honed main bearing bore
Cylinders honed on computer controlled machine to within .0002 straightness and roundness

Rotating Assembly:
Forged crank
3.75” stroke and 5.7” Rods
150,000 psi rod bolts
Forged pistons
Balanced rotating assembly
High volume oil pump
Hydraulic roller camshaft
Heavy duty roller timing set

Heads:
BluePrint Performance Aluminum
64cc chamber
Hardened retainers and springs
2.02 swirl polished intake valves
1.60 swirl polished exhaust valves
(BluePrint Aluminum Head Part# H8103)

Cam Specs:
Roller, .555 Intake
.576 Exhaust & 236 Intake
242 Exhaust duration @ .050 - 110 degree lobe separation

Also Includes:
Valve covers
Harmonic balancer
Water pump, short, reverse rotation, 30% more flow over stock pump
Air cleaner
Spark plugs & wires
Dyno test results shipped with engine

Call 1-800-483-4263 today to order or speak to a product technician!